Technicote > Resources > Component Guide

Component Guide

Download Component Guide


Title Description Min. Application Temp. Service Temp. Range Data Sheet
AP151 An improved general purpose permanent rubber based adhesive which has high initial tack and high ulimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting and stripping traits. 25° F -65° F to 220° F 20074
AT150 An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20° F. Excellent permanency at room temps. Very good plasticizer, UV and solvent resistance. This adhesive offers a neutral ph level (acid-free). -20° F -65° F to 160° F 22447
AT333 An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20° F. Excellent permanency at room temps. Very good plasticizer, UV and solvent resistance. -20° F -65° F to 160° F 22417
DL400 A high-performance emulsion acrylic adhesive specifically designed for use in durable label applications such as chemical drums, indoor/outdoor equipment and appliances. DL400 adhesive is an aggressive, emulsion acrylic adhesive offering outstanding moisture, chemical, solvent and UV resistance. 35° F -65° F to 200° F 26170
TM-55 A specialty microsphere repositionable acrylic adhesive designed for roll to roll applications. This adhesive removes cleanly from most papers and a wide variety of substrates. 40° F -10° F to 150° F 20120
TF335 A freezer-grade rubber based adhesive with good initial tack and good ultimate adhesion when applied at temperatures as low as -20° F. This is a firm, minimal cold flow removable at room temps. -20° F -65° F to 140° F 20026
TL250 An outstanding general purpose permanent adhesive which has high initial tack and high ultimate adhesion. It is used for tire label and many other difficult to label substrates. 25° F -65° F to 220° F 20084
IP400 A specialty adhesive designed to adhere to glass wine bottles with good ultimate adhesion when applied at temperatures as low as 35° F. Excellent permanency at room temperatures. Good plasticizer, UV and solvent resistance. Excellent adhesive for wet strength wine label facestocks when submersed in ice buckets. 35° F -65° F to 200° F 23520
TP160 A general purpose tackified acrylic adhesive showing high initial tack, shear and high ultimate adhesion. It hasa good plasticizer, UV and solvent resistance. This adhesive also displays excellent die-cutting and stripping traits and has excellent adhesion to many different substrates. 35° F -65° F to 200° F 20066
TP170 A general purpose acrylic adhesive showing good initial tack with high shear and high ultimate adhesion. It has good plasticizer, UV and solvent resistance. This adhesive displays excellent die-cutting and stripping characteristics and has good adhesion to many different substrates. 35° F -65° F to 180° F 22170
TP500 A general purpose hotmelt adhesive with high initial tack and excellent ultimate adhesion. This adhesive demonstrates good resistance to water, UV, solvent and plasticizer. TP500 has outstanding adhesion to most plastic substrates, especially HDPE milk jugs. 25° F -65° F to 140° F 22272
TP750 A general purpose hotmelt adhesive with initial tack and excellent ultimate adhesion. This adhesive demonstrates good resistance to water, UV, solvent and plasticizer. This adhesive has excellent die-cutting characteristics for high speed, wide web processing. Excellent adhesion to corrugated and plastics. 25° F -65° F to 140° F 27129
TR-1 A specialty acrylic adhesive designed for clean removability from plastics and painted metal. Not recommended for curved or textured surfaces. 40° F -10° F to 180° F 1135
TR440 A specialty clear acrylic adhesive showing good initial tack with high shear and high removable adhesion. This adhesive has excellent clarity and minimum cold flow. Good removability on a wide range of subsrtates including corrugated and many plastic surfaces. 40° F -65° F to 150° F 22440
TR445 A specialty acrylic adhesive showing good to low initial tack with low shear and outstanding removable adhesion with good clarity and minimum cold flow. Excellent removability on a wide range of substrates. Not recommended for curved or textured surfaces. 25° F -10° F to 120° F 29445
TR447 A general purpose, removable rubber based emulsion adhesive featuring good initial tack and moderate adhesion. It has limited plasticizer, UV and solvent resistance. 40° F -65° F to 150° F 20447
TS523 A specialty clear acrylic adhesive featuring high initial tack, high shear and high ultimate adhesion with excellent clarity and minimum cold flow. It has outstanding plasticizer, UV, solvent, and occasional water and oil resistance. This is an acid-free adhesive. 35° F -65° F to 200° F 22599
TS583 A specialty adhesive designed to adhere to hard to label surfaces with excellent ultimate adhesion with applied at temperatures as low as -20° F. Outstanding permanency at room temperatures. This adhesive has good plasticizer, UV and solvent resistance and high initial tack. -20° F -65° F to 140° F 20573
TS585WS A specialty adhesive designed to adhere to slightly wet surfaces with good ultimate adhesion when applied at temperatures as low as -20° F. Excellent permanency at room temperatures. Good plasticizer, UV and solvent resistance. Excellent adhesive for hard to label substrates. -20° F -65° F to 140° F 20585
TD101 A dairy label hot melt adhesive featuring excellent adhesion for a variety of dairy applications including milk jug labels, cheese and juice labeling, bakery and deli packages. Also works great for applications that need strong immediate adhesion. 10° F -40° F to 140° F 22681
Sub Zero An aggressive rubber based hot melt adhesive designed to work in challenging freezer applications. This adhesive displays high initial tack and ultimate adhesion when applied under typically demanding freezer conditions. Recommended for freezer applications including frozen food and meat package labels and flash frozen food process. Sub Zero can be applied at temperatures as low as -15 F to a variety of surfaces, including those with some lever of frost present. Not recommended for applications above room temperature. -10° F -40° F to 140° F 22025


Title Description Basis Weight Caliper Data Sheet
40#SCK Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing. 40 2.5 5517542
40# Natural Brown SCK Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing. 40 2.5 17743
2.5 Mil Layflat A bleached kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand die-cutting and has excellent layflat characteristics while providing outstanding dimensional stability. 0 2.5 18089
2.5 Mil Laser Liner A bleached kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand die-cutting and has excellent layflat characteristics while providing outstanding dimensional stability. 0 2.5 19916
65#FBK A fully bleached kraft liner which has been silicone coated one side to give a controlled release. This paper has high internal strength to withstand all conventional processing operations including die-cutting, perforating, fanfolding and refolding processes. 0 3.8 47544
3.2 Mil Laser Liner A bleached kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand die-cutting and has excellent layflat characteristics while providing outstanding dimensional stability. 44 3.2 117931
50#SCK Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing. 0 3.2 5517543
50#SCK Ultimate Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing. 0 3.2 918332
40#SCK Ultimate Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. Technicote Ultimate silicone release coating provides consistent stripping at high converting speeds through a flat release profile. This paper has a smooth, caliper consistent surface and withstands all conventional processing operations. 40 2.5 718332
3.4 Mil Layflat A bleached kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand die-cutting, marginal punching, perforating, fanfolding and refolding process while providing excellent dimensional stability. 0 3.4 517931
4.5 Mil Layflat A clay coated kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand all diecutting, margin punching, perforating, fanfolding and refolding processes. It is an excellent lay-flat liner. 0 4.5 919365
4.6 Mil Layflat A clay coated kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand all diecutting, margin punching, perforating, fanfolding and refolding processes. It is an excellent layflat liner. 0 4.6 719363
4.6 Mil Layflat TU A clay coated kraft liner which has been silicone coated one side to give a controlled release. It is designed to withstand all diecutting, margin punching, perforating, fanfolding and refolding processes. It is an excellent layflat liner. 0 4.6 718347
1.7 Mil Glassine A white semi-transparent and smooth caliper liner that has been silicone coated one side to give a controlled release. 28 1.7 9917015
8 pt. Tag (100#) An 8pt. 100# tag liner which has been silicone coated one side to give a controlled release. It has exceptionally high internal strength to withstand all conventional processing operations including die-cutting, perforating, fanfolding and refolding processes. 0 8 17380
44# PK A medium weight natural kraft coated 1 side (C1S) with a gloss polyethylene. Silicone coating has been added on the gloss side (C1S) for a controlled release. It has superb smoothness, excellent dimensional stability and exceptional layflat characteristics. 44 3.2 17745
Silicone Coated Image Liner A black image producing liner that has been silicone coated one side to give a controlled release. This paper has high internal strength to withstand all conventional processing operations including die-cutting, perforating, fanfolding and refolding processes. 0 3.4 9017643
1.2 Mil Clear Polyster Liner An economical 1.2 mil clear polyester film liner good for an array of prime label applications. 0 1.2 816666
1.5 Mil Clear Polyster A 1.5 mil polyester liner which has been silicone coated one side to give a controlled release. It has extremely high internal strength for ease in manufacturing, converting and end usage, making it an outstanding liner for high speed, automatic applications. 0 1.5 819827
2 Mil Clear Polystyrene A 2 Mil clear polystyrene liner which is silicone coated one side to give a controlled release. Uniform caliper and high internal strength enhance the excellent die-cutting characteristics of this liner. 0 2 17250
2 Mil Clear Polystyrene Dura-Liner A 2 Mil clear polystyrene liner which is silicone coated one side to give a controlled release. Uniform caliper and high internal strength enhance the excellent die-cutting characteristics of this liner. 0 2 17700

Questions? Contact our Customer Support team here.