Product Data Sheet Item # 78178
Email This Page
Print This Page
60# Ultra White Semigloss C1S / TS583 @ 2.10 Cwt. / 40#SCK L-3
Facestock(60# Ultra White Semigloss C1S): A premium coated one side stock with outstanding ink receptivity and print characteristics. It also offers good flexibility and high internal strength for ease in converting. This face offers a 90% Brightness and an 88% opacity.
Type: Paper
Caliper: 3.20 Mil
Opacity: 88.5
Brightness: 90
Basis Weight: 60 # Rm 25 x 38
Tensile:
MD: 35 Lbs/in CD: 19 Lbs/in
Tear:
MD: 47 Grams CD: 46 Grams
Elongation:
MD: N/A CD: N/A
Regulatory Approval
RoHS: Yes
REACH: Yes
CPSIA: Yes
Prop 65: Yes
TPCH: Yes
Indirect Food: Yes
Direct Food: No
UL:
Adhesive(TS583 @ 2.10 Cwt.): A specialty adhesive designed to adhere to hard to label surfaces with excellent ultimate adhesion when applied at temperatures as low as -20 F. Outstanding permanency at room temperatures. This adhesive has good plasticizer, UV & solvent resistance and high initial tack.
Adhesive Type: Permanent Acrylic
Shear: 70 min.
Minimum Application Temperature: 20- F
Service Temperature: -65 F to 160 F
Typical Adhesion Values
Stainless Steel:
180° Peel: 5.9 lb/in
Loop Tack: 3.20 lb/in²
Glass:
180° Peel: 4.2 lb/in²
Polyethylene:
180° Peel: 4.1 lb/in²
Corrugated:
180° Peel: 4.9 lb/in²
Painted Metal:
180° Peel: 5.9 lb/in²
Regulatory Approval
RoHS: Yes
REACH: Yes
CPSIA: Yes
Prop 65: Yes
TPCH: Yes
Indirect Food: Yes
Direct Food: No
UL:
Release Liner(40#SCK L-3): Supercalendered Kraft (SCK) liner which has been silicone coated one side to give a controlled release. This paper has a smooth, caliper consistent surface. Due to its high internal strength it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.
Caliper: 2.5 mil
Basis Weight: 0 lb/ream
Tensile:
MD: 30 lb/in CD: 20
Tear:
MD: 32 CD: 32
Regulatory Approval
RoHS: Yes
REACH: Yes
CPSIA: Yes
Prop 65: Yes
TPCH: Yes
Indirect Food:
Direct Food:
UL:
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. Technicote will not be liable for damages in excess of the purchase price of products or for incidental or consequential damages. TECHNICOTE warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), TECHNICOTE shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with TECHNICOTE'S standards, correct such defects by suitable repair or replacement without charge at TECHNICOTE's plant or at the location of the products (at TECHNICOTE's election); provided, however, if TECHNICOTE determines that repair or replacement is not commercially practical, TECHNICOTE shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.