Tamper Evident Polyart™ - A tamper evident, cavitated, matte white, top coated high density polyethylene with a low internal bond strength that allows the film to delaminate and shred upon removal from a surface.  This water and grease resistant film can be printed by dot matrix, thermal transfer, gravure, screen, flexo and letterpress print methods with excellent results.

Tamper Evident Polystyrene Foam Label - A polystyrene product offering moderate internal strength that delaminates when removed.  This white, non-top coated face stock is a two layer co extruded product consisting of a predominate foam polystyrene layer laminated with a thin gloss paper for print receptivity.

2 mil Silver "VOID" Polyester - A 2 mil selective release polyester film for use in the manufacture of tamper evident labels.  This sub-surface destruct film incorporates a metallized silver coated layer which when applied to a Technicote substrate with a suitable pressure sensitive adhesive allows for immediate identification of tampering if any attempt is made to remove the label.  When the label is removed from the substrate, the coating splits from the polyester film leaving the imprinted "VOID" pattern showing undeniable evidence of tampering.

STES™ Synthetic Tamper Evident Substrate - A 4.1 mil matte white polyethylene based label film which utilizes both overt and covert technologies for highly sophisticated security applications. The base film, Tamper-Evident Polyart™ is a cavitated, biaxially oriented product, and is designed to shred upon surface removal. In addition, fluorescent fibers contained in a coating applied to the base film provide an invisible security shield to the naked eye.  STES™ contains a defined fiber concentration that is only available under UV black lighting.

55# Tamper Resistant Litho - A 55# coated one side face stock specifically designed with a low internal strength to aid in destructibility for security purposes.  55# Tamper Resistant Litho has excellent ink receptivity and print characteristics.