Technicote utilizes a wide variety of Acrylic and Rubber based adhesives in Permanent, Removable and Specialty grades to optimize the performance of your label application. We apply these adhesives in one of our four strategically located manufacturing facilities using Emulsion (water-based) and Hot Melt coating methods. Our ability to tailor the correct combination of adhesive, face stock, liner, release and coat weight means we can help you design a labeling application that exceeds your customer's expectations. 

New at Technicote

TM-55 Repositionable Adhesive

Having trouble opening this document?

Request a TM55 data sheet by contacting Technicote at 800-358-4448.

 

       Adhesive Specification Data Chart

Product

Number

Emulsion

Type

Adhesive

Type

Coat Weight

Grams/100

Sq. Inches

Service Range

Temperature

Minimum Apply Temperature

         
AP151 Rubber Permanent 1.3 -65°F to +220°F +25°F Y N Y Y Y
TL250 Rubber Permanent 2.5 -65°F to +220°F +25°F Y N Y Y Y
TP160 Acrylic Permanent 1.4 -65°F to +200°F +25°F Y N Y Y N
TS574 Rubber Permanent 2.1 -65°F to +200°F +32°F Y N Y Y N
TI600 Rubber Permanent 2.5 -65°F to +200°F +35°F Y N Y Y N
TP170 Acrylic Permanent 1.3 -65°F to +180°F +35°F Y N Y Y Y
TS523 Acrylic Permanent 1.5 -65°F to 200°F +35°F Y N Y Y Y
TR440 Acrylic Removable 1.0 -65°F to 150°F +40°F Y N Y Y Y
OL1 Acrylic Permanent 1.3 -65°F to 200°F +50°F Y N Y Y Y
TF335 Rubber Semi-Perm 1.5 -65°F to 140°F -20°F Y N Y Y Y
TR447 Rubber Removable 1.4 0°F to 120°F +40°F Y N Y Y Y
AT333 Acrylic All Temp Perm 1.3 -65°F to 160°F -20°F Y N Y Y N
TS585WS Acrylic Permanent 1.7 -65°F to 140°F -20°F Y N Y Y N
TS583 Acrylic Permanent 2.1 0°F to +150°F 0°F Y N Y Y N
TR1 Acrylic Ultra Removable 1.1 -65°F to 120°F +40°F Y N Y Y N
TP500 Hot Melt Permanent 1.3 -65°F to 180°F +25°F Y N Y Y N
TR445 Acrylic Removable 1.3 0°F to 120°F +25°F Y N Y Y N
TP304 Acrylic Permanent 1.3 0°F to 140°F +50°F Y N Y Y N
                     

*Color coding designates adhesives that have the same base polymer. Adhesive # followed by "A" denotes a 1.0 coat weight.  (i.e. TR447A). For product data sheets on Technicote adhesives, please click here.

       
 
 
   
   
   
   
   
   
   
   

©Copyright 2005 - Technicote, Inc. - All Rights Reserved